diff --git a/presets/FDRC/f722v2.x/f722v2.2/remapping/rpm-port.txt b/presets/FDRC/f722v2.x/f722v2.2/remapping/rpm-port.txt
deleted file mode 100644
index b053b80..0000000
--- a/presets/FDRC/f722v2.x/f722v2.2/remapping/rpm-port.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-#$ TITLE: FlyDragon F722V2/F722V2.2 RPM Port Selection
-#$ FIRMWARE_VERSION: 4.4
-#$ FIRMWARE_VERSION: 4.5
-#$ BOARD_NAME: FLYDRAGONF722_V2
-#$ BOARD_NAME: FLYDRAGONF722_V2_2
-#$ CATEGORY: REMAPPING
-#$ STATUS: COMMUNITY
-#$ KEYWORDS: rpm-s rpm-e rpm
-#$ AUTHOR: FlyDragonRC
-#$ DESCRIPTION: Changes the utilized RPM port
-#$ PRIORITY: 0
-
-#$ OPTION_GROUP BEGIN: (EXCLUSIVE) RPM Port
-    #$ OPTION BEGIN (CHECKED): RPM-E
-    resource FREQ 1 A01
-    #$ OPTION END
-    #$ OPTION BEGIN (UNCHECKED): RPM-S
-    resource FREQ 1 A15
-    #$ OPTION END
-#$ OPTION_GROUP END
diff --git a/presets/FDRC/f722v2.x/f722v2.2/remapping/servo5.txt b/presets/FDRC/f722v2.x/f722v2.2/remapping/servo5.txt
deleted file mode 100644
index e4ec3eb..0000000
--- a/presets/FDRC/f722v2.x/f722v2.2/remapping/servo5.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-#$ TITLE: FlyDragon F722V2/F722V2.2 Enable Servo 5
-#$ FIRMWARE_VERSION: 4.4
-#$ FIRMWARE_VERSION: 4.5
-#$ BOARD_NAME: FLYDRAGONF722_V2
-#$ BOARD_NAME: FLYDRAGONF722_V2_2
-#$ CATEGORY: REMAPPING
-#$ STATUS: COMMUNITY
-#$ KEYWORDS: sbus, s.bus, fport, f.port, servo
-#$ AUTHOR: FlyDragonRC
-#$ DESCRIPTION: Enables the F.Port or SBUS output to be used as Servo 5.
-#$ PRIORITY: 0
-
-#$ OPTION_GROUP BEGIN: (EXCLUSIVE) Servo 5 Port
-    #$ OPTION BEGIN (CHECKED): F.Port
-    resource SERIAL_TX 2 none
-    resource SERVO 5 A02
-    timer A02 AF3
-    mixer input CH10 -1000 1000 1000
-    mixer rule 10 set CH10 S5 1000 0
-    #$ OPTION END
-    #$ OPTION BEGIN (UNCHECKED): S.BUS
-    resource SERIAL_RX 2 none
-    resource SERVO 5 A03
-    timer A03 AF3
-    mixer input CH10 -1000 1000 1000
-    mixer rule 10 set CH10 S5 1000 0
-    #$ OPTION END
-#$ OPTION_GROUP END
\ No newline at end of file
diff --git a/presets/FDRC/f722v2.x/f722v2/remapping/ext-volt-to-bec.txt b/presets/FDRC/f722v2.x/f722v2/remapping/ext-volt-to-bec.txt
deleted file mode 100644
index a1ecc92..0000000
--- a/presets/FDRC/f722v2.x/f722v2/remapping/ext-volt-to-bec.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-#$ TITLE: FlyDragon F722V2 EXT Voltage -> BEC
-#$ FIRMWARE_VERSION: 4.4
-#$ FIRMWARE_VERSION: 4.5
-#$ BOARD_NAME: FLYDRAGONF722_V2
-#$ CATEGORY: REMAPPING
-#$ STATUS: COMMUNITY
-#$ KEYWORDS: ext, voltage, bec
-#$ AUTHOR: FlyDragonRC
-#$ DESCRIPTION: Enables the EXT Voltage Pin to be used as BEC voltage
-#$ PRIORITY: 0
-
-resource ADC_BATT 1 NONE
-resource ADC_BEC 1 C00
-
-set vbec_scale = 19
-set vbec_divider = 1
-set pid_process_denom = 2
\ No newline at end of file
diff --git a/presets/etocii/setup/2.2/etocii-filters.txt b/presets/etocii/setup/2.2/etocii-filters.txt
deleted file mode 100644
index a578ccf..0000000
--- a/presets/etocii/setup/2.2/etocii-filters.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-#$ TITLE: etocii's Filters
-#$ FIRMWARE_VERSION: 4.5
-#$ CATEGORY: SETUP
-#$ STATUS: COMMUNITY
-#$ KEYWORDS: filters
-#$ AUTHOR: etocii
-#$ FORCE_OPTIONS_REVIEW: true
-
-#$ PARSER: MARKED
-#$ DESCRIPTION: etocii's Filter Setup
-#$ DESCRIPTION: -----------
-#$ DESCRIPTION: 
-#$ DESCRIPTION: Description:
-#$ DESCRIPTION: -----------
-#$ DESCRIPTION: etocii's filters are his recommended filters that can be used with his presets.
-
-#$ INCLUDE: helpers/2.2/filter-defaults.include
-feature -DYN_NOTCH
-feature RPM_FILTER
-
-set gyro_lpf1_type = NONE
-set gyro_lpf1_static_hz = 100
-set gyro_lpf1_dyn_min_hz = 0
-set gyro_lpf1_dyn_max_hz = 0
-set gyro_lpf2_type = NONE
-set gyro_lpf2_static_hz = 50
-set gyro_notch1_hz = 0
-set gyro_notch1_cutoff = 0
-set gyro_notch2_hz = 0
-set gyro_notch2_cutoff = 0
-set dyn_notch_count = 6
-set dyn_notch_q = 25
-set dyn_notch_min_hz = 20
-set dyn_notch_max_hz = 240
-set gyro_rpm_notch_preset = 0
-set gyro_rpm_notch_min_hz = 20
-set gyro_rpm_notch_source_pitch = 10,11,12,13,14,21,22,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_center_pitch = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_q_pitch = 50,100,36,80,80,60,50,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_source_roll = 10,11,12,13,14,21,22,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_center_roll = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_q_roll = 50,100,36,80,80,60,50,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_source_yaw = 12,13,14,21,22,0,0,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_center_yaw = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-set gyro_rpm_notch_q_yaw = 80,100,100,60,50,0,0,0,0,0,0,0,0,0,0,0
\ No newline at end of file